RLD™ Jackshaft Door Operator
Signature® Carriage
Model Light Duty
Our commercial operators are manufactured to meet the performance requirements of our commercial and industrial doors.
DOORDREAMER™: VIEW THIS DOOR ON YOUR HOME
Overview of the RLD™ Jackshaft Door Operator
The RLD Jackshaft is designed standard for Rolling Steel doors and for standard, high, and vertical-lift Sectional doors that have up to a 15-cycle/hour and less than a 30-cycle/day requirement. Designed for reliability with leading innovative features, the light-duty jackshaft sets a new standard in the industry.
Commercial Garage Door Openers
Overhead Door® Commercial door operators, provide an integrated door system that comes with our guarantee for reliable performance when you need it most — every day. Built with convenience in mind, our automatic door operators also make it safer and easier to perform daily job duties so you can improve efficiency and close the door on your competition.
Overhead Door® automatic door operators are manufactured to meet the performance requirements of our commercial and industrial doors, offering precise control of your door system for years of trouble-free operation. To improve safety and enhance the life of your door and motor, the industry’s guidelines for quality assurance recommend a single manufacturer for both door and operator. We are the only manufacturer that offers a full line of commercial and industrial doors and operators specifically designed for integral applications. We offer the industry’s broadest line of electric, automatic door operators to suit new construction and retrofit applications, as well as unusual or special requirements. Overhead Door® commercial operators are UL 325 2010 compliant.
Our Commercial Operator classification specifications are listed out below:
- Heavy Duty Operators: Our RHX operators are heavy duty and operate up to 60 cycles per hour under a large constant load.
- Standard Duty Operators: Our RSX operators are standard duty and operate up to 60 cycles per hour during peak usage periods only.
- Medium Duty Operators: Our RMZ operators are medium duty and operate at 15 cycles per hour.
- Light Duty Operators: Our CDX operators are light duty and operate at 4 cycles per hour.
Features
- Easy push to set limits
- UL 325 Listed
- Automatic open and close door force settings
- Open/Close/Stop control station
- Programmable mid-stop
- Time-to-close can be set at pre-defined values between 0 seconds and 5 minutes
- Pull cord release for emergency manual operation.
- 2-year limited warranty
- Commercial photocells
- 7.5 in/sec door speed in both directions in most applications
Operational on doors up to 14 ft. tall with up to 84” of highlift, 18 ft. wide, 180 sq ft., and 850 lbs
RLD Jackshaft Advantages
- CodeDodger® 315/390 MHz receiver can store up to 255 standard and/or open/close/stop transmitters
- Soft start and stop reduces stress on the door and operator for improved life
- Safe-T-Pulse® – Internal cable slack detection eliminates external cable monitoring devices and reverses door travel when cable tension isn’t detected for safety
- Operator force profile detects irregularities in operation of the door to identify unsafe door operation. The force profile is updated every cycle to account for changes in weather and temperature
- Precision sealed roller bearings on output shaft for improved power transfer
- Interlock circuit with pre-installed jumper
- Output shaft coupler utilizes six set screws with threadlocker to reduce shaft slippage and screw back outs
- Output shaft coupler can be used on 1” hollow or solid door shafts with 1/4” keyway
- Optional LED worklight may be toggled via the stop button on Open/Close/Stop control station when the door is inactive
- Small operator profile of 12” length by 6.9” width allows for use in tight applications. Only requires 2.5” of headroom clearance and 7” of side room clearance to be used
Product Specifications
| Mounting | Able to be wall-mounted direct couple on sectional doors. |
| Motor | Quiet, powerful 24 VDC with usage-based thermal shutdown |
| Advanced radio receiver system with auto seek frequency range | Quickly and easily learns up to 250 CodeDodger® transmitters. This system will automatically cycle between 315 and 390 frequencies. |
| Easy limit setting | An easy-to-set limit sensor that makes it easy to set and maintain limits. |
| Standard commercial features | Mid-stop, O/C/S push button station, timer-to-close, commercial photoeyes. |
| Optional accessories can be added at any time | OHDAnywhere®, light kit, door lock, and battery backup. |
| UL 325 Listed | Requires the addition of monitored external entrapment devices prior to the operator working in momentary contact in the close direction. |
Documents
Explore the full specifications of our products. Our technical data sheets provide comprehensive information on dimensions, assembly methods, and construction requirements. Make well-informed decisions by planning your investment down to the last detail.